PSE Archery TAC 2013 - Manual (Page 6)

CROSSBOW OWNER’S GUIDE
®
6
PSE TAC CROSSBOW ASSEMBLY (CONT.)
4. Rotate the AR-15 into the rear pin hole of the crossbow
barrel and secure the rear pin. (Figure 4.)
SAFETY INSPECTION
1. Before using the PSE TAC Crossbow, inspect the
nocking loop for wear. If there is any visible wear or
fraying to the loop, before shooting the crossbow, have
your PSE Crossbow Dealer or the PSE factory replace
it. (Figure 5.) When the loop shows wear, the string,
cables and draw cord are also worn and should be
replaced.
WARNING: Loop material is specially engineered.
DO NOT
replace with standard loop material.
2. Inspect the bowstring at the points where it contacts
each cam. If there is any sign of wear or fraying, have it
replaced by a PSE Crossbow Dealer or the PSE factory.
(Figure 6.)
NOTE:
Crossbow Maintenance Kit P/N
01209 is available from your local PSE
dealer, which includes a string with loop
installed, cables, and draw cord.