PSE Archery Dream Season RDX 2015 - Manual (Page 10)

CROSSBOW OWNER’S GUIDE
®
10
SHOULDER SLING INSTALLATION
DO NOT install your crossbow shoulder strap while
crossbow is cocked/loaded.
1. Attach the end of the shoulder sling with the spacer/
receiver clip onto the hole on the receiver bolt just below
the prod assembly on the riser. Align the sling anchor
over spacer and tighten the mounting screw, making sure
the anchor is firmly attached. Open swivel and slide clip
through the anchor located on the side of the barrel just
behind the riser. Tighten swivel into locking position. (Fig.
15)
2. Attach the opposite end of the shoulder sling to the
receiver hole just below the stock of the crossbow,
Fig. 16
CROSSBOW OWNER’S GUIDE
®
Notes:
Fig. 15