Profax PRO II x - Manual (Page 7)

® ®
®
Section 3 Installation
®
5 4
Section 2
Specifications & Warranty
SPECIFICATIONS
Type of input power required Single-Phase 24 VAC, 7 Amperes, 50/60 Hertz. (If the power source has only
from power source. 115 VAC power available, use the optional (St./No. 9045) 115/24 VAC transformer)
Maximum weld circuit rating. 100 Volts, 500 Amperes, 100% Duty Cycle
Required welding power source. (CV) Constant Voltage with contactor
Wire feed speed 30 to 650 IPM
Wire size range .023 (.6mm) to 1/16 in. (1.6mm)
Dimensions Length: 22.25 in. (565mm) x Width: 10 in. (254mm) x Height 11 in. (279mm)
PRO IIx Net: 28 lbs. (12.7 Kg.) Ship: 30 lbs. (13.6 Kg.)
Weight PRO IVx Net: 30 lbs. (13.6 Kg.) Ship: 32 lbs. (14.5 Kg.)
(Add 4 lbs. (1.8 Kg.) If optional 115/24V transformer (p/n 9045) is factory installed.)
WARRANTY
LIMITED WARRANTY - Subject to the terms and conditions hereof, PROFAX, Pearland, TX warrants its products to be
free from defects in workmanship and material at the time of delivery by PROFAX.
PROFAX will honor warranty claims on products as a result of failure from a defect for a time period as listed below for
the particular product line, from date of sale to the original user.
Consumable products manufactured by PROFAX ....................................................... 30 days
Contactors, Meters and Resale consumable products ................................................ Original Manufacturer's Warranty
Mig Guns, Flux Cored Guns, and Spool Guns .............................................................. 90 days
Gouging, Plasma, Tig Torches and CO
2 Heaters .......................................................... 90 days
Control, Extension, Interconnect and Adapter Cords ................................................... 90 days
Twist-lock, Multi-pin Plugs, and Connectors ............................................................... 90 days
® ® ® Esab , Lincoln , Miller and PROFAX Drive Rolls ........................................................ 90 days
Remote Fingertip, Hand and Foot Controls ................................................................. 90 days
Fan Motors, Rheostats, Diodes and Brushes .............................................................. 90 days
Spool Gun Controls ................................................................................................... 1 year
Pro II Tig ................................................................................................................... 1 year
Welding Power Sources and Wire Feeders ................................................................. 3 years
Shelf Life before Warranty Starts ................................................................................ 1 year
Upon the return of the merchandise at user's expense, PROFAX reserves the right to either repair or replace as
necessary.
This is the only warranty either expressed or implied covering our products.
MAILING SHIPPING
P.O. Box 898 1603 North Main
Pearland, TX 77588-0898 Pearland, TX 77581-2803
CAUTION!
NOTE: Read and understand the safety information in Section 1 before attempting installation.
CONNECTING THE WIRE FEEDER
CONNECTING THE WELDING GUN
Note: Route all cables and hoses through cable
clamp.
1. Attach weld cable from power source to
power block.
2. Attach gas hose from flowmeter regulator
to gas inlet fitting.
(5/8-18 right hand inert gas)
3. Attach control cable from power source to
RC1 receptacle.
SEE SECTION 4 FOR DRIVE ROLL AND CONTROL CABLE SELECTION
1. Euro-Quick Mig Gun
2. Securing Nut
3. Euro-Quick Adapter
Align and insert Euro-Quick style Mig Gun into adapter. Secure the Mig Gun by tightening the securing nut to the Euro-Quick Adapter.
2
3
1
2
1
3