Posiflex PD-6507U - Manual (Page 6)

8. Tilt up and down the customer
display in the direction shown by
the arrow. Please do not press on
the LCD panel while adjusting the
titling angle.
Mounting PD-6307R onto your 15”/17” KS series Terminal
Please follow the below instructions to install the customer display onto your
POS terminal. During installation of PD-6307R, do NOT power ON the
terminal. In the example, KS-7515 POS terminal will be used to demonstrate
how to complete the installation of PD-6307R.
1. Position your terminal with its rear
facing towards you.
2. Locate the “Posiflex” sticker at the
rear of the terminal. Use a pin tool
to tear off the sticker which is used
to cover the screw holes.
3. Take L type mounting bracket out
of the package. Align the four
screw holes of the mounting
bracket with the hole pattern at the
back of the terminal.
6