Posiflex PD-6507U - Manual (Page 4)

Mounting PD-6207R onto your POS Terminal
Please follow the below instructions to install the customer display onto your
POS terminal. During installation of PD-6207R, do NOT power ON the
terminal. In the example, XT-3000 POS terminal will be used to demonstrate
how to complete the installation of PD-6207R.
1. Take the customer display and
stand base out of the PD-6207R
package.
2. While lifting the customer display
with one hand holding onto the
tube, neatly pull the extra cable
through cable exit at the bottom of
the stand base.
3. To join the tube to the stand base,
have the arrow of the tube point
towards the similar mark on the
stand base. Then, push down the
tube until it is locked into place.
(To release the tube from the stand
base, hold down two release
buttons, and then twist and pull up
the tube.)
Cable Exit
Release
Button
Arrow mark
Arrow mark
4