Posiflex JIVA KS-7215 - Manual (Page 15)

Part 15
Please use the recovery DVD in rescue operation only. Using it otherwise
may wipe out whatever stored in the HDD! All upgrade devices drivers
needed for manual installation in usual way are available in the subfolder
“\drivers” in OS recovered HDD and the latest versions of these required
drivers will be available on our web: http://www.posiflex.com.tw. Then follow
instructions from your system integrator for software recovery.
OPERATING SYSTEM INSTALLATION
This product is highly professionalized equipment. The installation of an OS
into a machine without any preloaded OS could be a major difficulty for
average user or obstacle by possibly unintentional negligence even for PC
veterans to accomplish such a task. Therefore, OS installation into a system
without preloaded OS is highly discouraged. Posiflex Technology, Inc. shall
not be responsible for any technical support to questions on this aspect.
USING THE TOUCH TERMINAL
APPLICATION ENVIRONMENT
It is very important that you check the following operational guidelines:
Ventilation
This terminal must NOT be operated in an environment with restricted
ventilation. There must be at least 25 mm air clearance around any top or side
ventilation holes with a free flow of air around the unit at ALL times for the
installation.
Operating Environment
The equipment must not be operated or stored in extremes of both temperature
and humidity/moisture. (Operating range 0°C to 40°C and up to 80%
humidity – non condensing, max. wet bulb 26°C)
UPS Battery (option)
General care:
The UPS battery is consumables beyond product warranty. Please definitely
observe the alerts in beginning of this manual. If the equipment is to be
powered off for more than few days, please always disconnect the battery
from the system. Reconnect it and turn on the system to recharge the battery
for 1 ~ 2 hours every 3 months for temperature lower than 30°C. Recharge for
1 ~ 2 hours every month for temperature over 30°C. Temperature above 40°C
must be strictly avoided as it could cause termination of battery life and
unexpected result even if the battery is not in work. The UPS battery can
support basically the data preservation and smooth running of the system