Where to get additional information, Preface, Models & options – Pertech 6100 Series User Manual
Page 5: Ordering supplies
Pertech Resources Inc.
October 2007
220350A
1
Preface
This manual has been written to help you Install and Operate your Pertech® 6100 Series Scanner. Feel
free to contact us if you need further assistance after reading this manual. Please see the Troubleshooting
Scanner Problems section of this manual and determine the complete part number of your scanner prior to
calling. Pertech provides technical support Monday through Friday from 8:00 AM to 5:00 PM MST at 307-
856-4821.
Every effort has been made to insure the information in this manual is complete and accurate. Feel free to
contact us with any comments concerning this manual. Pertech assumes no responsibility for errors.
Where to Get Additional information
The following publications contain more information about the 6100 series scanner. Contact your Pertech
sales representative to obtain additional copies of this Manual or any of the publications listed below.
Title
Part Number
6100 Scanner: Setup Guide
220349
6100 Scanner: Users Guide
220350
6100 Scanner: Service Guide
220351
6100 Scanner: Pertech API Programming Manual
220346
6100 Scanner: Command Manual
220347
6100 Parts Information Manual
Ordering Supplies
The following section lists the paper and supplies available for order. In addition to paper and ribbons,
Parts, service and repair may be obtained by calling 1-800-800-6614.
Description
Part Number
Sun Stamp
108762-001
Imaged Stamp
108762-002
6100 Scanner Certified USB Cable 6’
106356-011
6100 Scanner Certified USB Cable 10’’
106356-014
6100 Scanner Contact Image Sensor Wipe
108784
Unique Item Examples
Orientation Vertical or Horizontal
Stand
Adjustable Deck Guide
Deck Options
Case Color
Firmware
Logos
Cables
Available Models:
613211-001
}
}
}
}
}
}
}
Unique Feature Identifier
Software Compatibility Identifier
5=Ranger Silver Bullet, 0= None
Model Series 61=6100 Family
Contact Image Sensor - Color - 2=2 Color, 3= B/W
DPI Capability - 2=200, 4=400
MICR - 0=No, 1= Yes
Stamp - 1= Yes, 2=No
Models & Options
www.pertechresources.com