Pertech 6100 Series - Manual (Page 11)

Pertech Resources Inc. October 2007 220350A 7
ID Card Scanning Process
The application software calls for the user to insert a ID card into the scanner, the Green Power On LED
begins blinking to indicates that the scanner is waiting for a ID card.
There are two sensors (#7) identified in the Features Identification on page 3. The first sensor tells the
scanner that a ID card is present, activates feed the motor and draws the ID card into the scanner.
The second sensor if activated passes the ID card through to the imaging heads and ejects it out the ID card
Exit Path (#2 on the bottom image of the Features Identification) in the back of the scanner
.
Back of Scanner
LED Indicators
Equipped with one three color led indicator that typically identifies
Power on, Ready for Form, and Error.
(See Note Below).
Status Right LED
Power On Green
Insert form Blink Green
Error Red
Note:
LED functions can also
be defined via control
commands. Application
developers see the 6100
programing manual for
details.
Contact your Pertech
Representative for the
necessary files and
documentation.