Permasteel PG-50404S0L - Manual (Page 9)

6
STEP II:
ƒ
Remove side panel (marked “R”) , two legs (marked “RF” and “RB”), Right
Transom and two 3” casters with brake from the carton. Assemble two legs to
Right side panel with four 5/32-32x1/2” screws.Also attach right transom to right
side panel with four 5/32-32x1/2” screws.Then screw one caster to each bottom
end of leg.
ASSEMBLY INSTRUCTIONS
STEP III:
ƒ
Assemble bottom panel and door bracket to side panel assemblies with eight
1/4-20x1-1/2” screws.
Note: Attach only two upper screws on the door bracket, set aside the other two
screws for STEP IV.
ƒ
Assemble back panel to bottom panel and side panel assemblies with six 1/4-
20x1/2” screws.