Permasteel PG-50404S0L - Manual (Page 13)

10
STEP VII(continued):
9. Secure gas valve to control panel using the M4*6 screws.
10. Insert side burner into shelf, make sure valve tip inserts into burner shaft.
Note: It will only insert about ¼”.
11. Replace and tighten screws of side burner brackets C & A .
12. Replace side burner cooking grid.
13. Attach igniter wire to valve and place red sleeve over connection.
14. Press control knob onto valve steam, and tighten knob setscrew.
Very Important: Regulator and hose must pass UNDER right transom before
connecting to LP tank.
ASSEMBLY INSTRUCTIONS
13
11
9 10
12
14
Bracket A