Input connections, 1 input connections – OWON HDS1021M User Manual
Page 15
OWON HDS1021M Handheld DSO & DMM 5-Input connections
5. Input Connections
5.1 Input Connections
See the following figure 2:
Figure 2
Description:
1. The power adapter is supplied for AC power supply and battery recharging.
2. Multimeter test lead.
3. Multimeter input jacks, including three circular banana jacks and two square jacks.
The three circular jacks are used for voltage, current and resistance inputs, while the two
square jacks are used for capacitance inputs.
4. Oscilloscope probe.
5. Oscilloscope channel input.
6.
The output terminal of 1KHz/5V square-wave test signal.
8