Description – Orion System OE361-13 CommLink 5 User Manual
Page 3
Form: ORION-OE391-12-ModularServiceToolSD-1B.doc
Page
1 of 1
Description
The OE391-12 Modular Service Tool SD is
a system interface that provides a direct
link to enable the system operator to view
the status, configure, and adjust the
setpoints of the following Orion controllers:
VCM-X Series Controller
VCM-X E-BUS Series Controller
RNE
Controller
VCB-X
Controller
SA E-BUS Controller
VCM
Controller
VAV/CAV
Controller
MUA II Controller
VAV/Zone
Controller
MiniLink
PD
The OE391-12 Modular Service Tool SD is
housed in a black plastic enclosure. The
display area is covered with a clear plastic
bezel for protection of the display screen.
The Modular Service Tool SD has a four
line by 20 character display panel with
adjustable contrast control and a 27 key
membrane keypad for data selection and
entry. All keypad operations are simple
and straight forward, utilizing non-cryptic
plain English language messages. Menu-
driven programming allows for easy setup
and operation without the need for
specialized training. The OE391-12
Modular Service Tool SD is supplied with a
programmable 4 Gigabyte SD memory
card, with (4) AA 1.5 V batteries, a wall
mount a DC power supply, a mini-Din communication cable, and an E-BUS communication cable. The mini-Din
cable allows you to connect the Modular Service Tool to any Orion controller which has a mini-Din connector
socket for programming, monitoring, and troubleshooting purposes.
The Modular Service Tool is also equipped with an EBC E-BUS port and an RS-485 three conductor terminal
block port. The E-BUS port and included E-BUS cable are used for updating E-BUS Module software.
The RS-485 port is used for hard-wiring to older controllers that do not have a mini-DIN connector socket.
The Modular Service Tool SD is designed to be carried by the system installer or service technician. Its rugged
plastic housing provides superior protection for the electronic components housed inside. The Modular Service
Tool SD is a top quality service tool that will stand up to the demands of the typical job site for many years.
Mode
Selection
6
5
4
7
0
8
1
3
2
9
-
10.
00”
4.75”
2.02"
E-BUS
HAND
HELD PLUG
RS-485 COMM
R
SH
LD
T
SD CARD SLOT
(Push to Eject)
Technical Data
OE391-12 Modular Service Tool SD
Power
(4) AA (1.5V) Batteries
Supplied
Display
4 Line by 20 Character
Power Switch
Membrane Switch
Network Connection
RS-485
Operating Temp
10
F to 149F Protocol
HSI Open Protocol Token Passing
Operating
Humidity
90% RH Non-Condensing
Color
Black
Keypad
27 Key Membrane Style
Communications
RS-485 9600 or 57,600 Baud
SD Memory Card
Programmable 4 Gigabyte
Connections
RS-485 and EBC E-BUS Ports
3 Year Warranty
WattMaster reserves the right to change specifications without notice
OE391-12
Modular Service Tool SD