DCS none - Manual (Page 4)

dCS Scarlatti Clock User Manual Software Issue 1.0x
June 2008
Filename: Scarlatti Clock Manual v1_0x.doc Page 4 English version
U
SING THE dCS Scarlatti Clock FOR THE FIRST TIME
Congratulations on purchasing your dCS Scarlatti Clock.
Before using your unit, please read this section and the Step by Step Guide. This will enable you to
set the unit up quickly and safely with your hi-fi system.
From time to time, dCS will release updated software on CD that you can install yourself using the CD
Update feature. Please check our web-site occasionally to see if new Scarlatti software is available, or
consult your dealer.
What’s in the box?
Check that the box contains the following items:
• dCS Scarlatti Clock
• Manual and Menu / Setup Guide
• Power
cable
• 3x BNC cables
• spare
fuses
Notify your dealer as soon as possible if anything is missing or damaged. We suggest that you retain
the original packaging for possible future use. If this is not possible, replacement packaging can be
ordered from dCS or our distributors. Details can be found on our web site at
www.dcsltd.co.uk .
The Scarlatti Transport is supplied with a programmed Philips Pronto remote control. If you do not
have a Scarlatti Transport in your system, a programmed Pronto can be ordered direct from dCS as an
optional extra.
Safety Notice
Your dCS Scarlatti Clock contains no user serviceable parts. DO NOT attempt to open the case as
there are potentially dangerous voltages present inside. In the event of the unit developing a fault,
please contact your dealer in the first instance.
Mains Voltage Setting
Before connecting the power cable to the unit for the first time, please check that it has been set to the
correct operating voltage for your mains supply. The unit’s voltage setting is shown on the label
beneath the mains inlet on the rear panel. If this does not match your local supply voltage, DO NOT
attempt to use the unit. Contact your dealer to have the unit reset. Using the unit with the wrong mains
setting for your local supply may result in serious damage to the unit and will invalidate the warranty.
Do not attempt to reset the voltage yourself.
Power Cables
If you wish to use a power cable other than the one supplied, please ensure that it is a good fit to the
mains inlet, and is not so heavy and inflexible as to place strain on the mains inlet.