DCS none - Manual (Page 14)

dCS Scarlatti Clock User Manual Software Issue 1.0x
June 2008
Filename: Scarlatti Clock Manual v1_0x.doc Page 14 English version
INFORMATION Menu
The Version page displays the software versions loaded in the unit and the full serial
number. Please have this information ready if you contact your dealer for any reason.
The Contact page displays dCS web-site URL, email address, telephone and fax
numbers. If you have any difficulty, please contact your dealer for help first.
The Clock Information page reports the status of the unit:
Output frequency ....kHz
Coupling TTL / Bipolar
Dither on / off
Temperature ....
°C
Temperature stable / unstable
Master / Slave mode
Input frequency ...kHz / ...MHz / unlocked
Use the
← →
buttons to scroll down the list and the MENU button to exit.
The CD Update feature allows you to load new software into your system from either a
Scarlatti transport or any STANDARD CD player or transport. Note that some non-Red-
Book CD transports change the digital data and cannot be used to download new
software. Please follow the instructions supplied with the update CD carefully.
CLOCK SETTINGS Menu
The Coupling menu page sets the External Input to accept either an AC coupled Bipolar
reference (generated by a GPS receiver, for example) or a Word Clock at TTL levels.
The Factory Reset menu page resets the unit to standard settings. These are:
Output Frequency to 44.1kHz.
Dither to Off.
Coupling to TTL .
Display to On.
Brightness to maximum.
Contrast to 60%
DISPLAY SETTINGS Menu
Set the display Brightness to a comfortable level.
Set the display Contrast to a comfortable level.
Runs a Display Test routine, which flashes all the indicators and the main display.