4 display, 5 frequency button, 6 menu button – DCS none User Manual
Page 10: 7 remote control receiver, Display, Frequency, Button, Menu, Remote control receiver
dCS Scarlatti Clock User Manual
Software Issue 1.0x
June 2008
Filename: Scarlatti Clock Manual v1_0x.doc
Page 10
English version
Display
In normal use, the clock frequency is shown at the top of the display (D), for example:
The icons at the bottom show the current settings or operating conditions. From the left, these are:
• Temperature stabilised, if the icon is displayed.
•
Dither
on, if this icon is displayed.
•
Coupling
menu setting (
TTL
is shown, the alternative is
Bipolar
).
• If the unit is locked to an external reference,
SYNC
is displayed instead. If an external reference is
connected but the unit cannot lock to it,
SYNC
is displayed greyed out.
Details of the menu displays are shown in the Menu section on page
FREQUENCY
Button
Use the
FREQUENCY
button (E) to set the clock frequency to either
44.1kHz
or
48kHz
. The usual
setting is
44.1kHz
.
MENU
Button
Press the
MENU
button (F) to open the menu, select menu pages and change settings. See the Menu
section on page
for information on using the menu features.
Remote Control Receiver
Aim the remote control handset towards the receiver (G) for best sensitivity.