ONICON System-10 BTU User Manual
Page 5
11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
System-10 BTU Meter Manual 03/15 - 0651-16 / 18323
Page
5
SECTION 1.0: INTRODUCTION
1.1 PURPOSE OF THIS GUIDE
The purpose of this guide is to provide installation and commissioning procedures and basic
operating and servicing instructions for the ONICON SYSTEM-10 BTU Meter.
1.3 STANDARD FEATURES AND SPECIFICATIONS
•
Single mode Btu calculations, in either the heating or cooling mode, are totalized,
and displayed.
•
Two-pipe dual mode Btu calculations in both the heating mode and the cooling modes, are
totalized and displayed.
•
Bi-directional dual mode Btu calculations are totalized and displayed.
!
WARNING
Only qualified service personnel should attempt to install or service this product. Serious injury
may result from the improper Installation or use of this product.
1.2 TYPICAL SYSTEM-10 BTU METER
ONICON’S System-10 is a true heat (Btu) computer, which accepts data from several sensors,
performs a series of computations with that data, and displays and/or transmits the results as an
indication of the amount of heat (Btu’s) being transferred per unit time or as a totalized amount.