Dynex DX-L26-10A - Manual (Page 2)

2
2. How do I set up my TV?
o
Have you tried using your quick start guide to help you through this process? If more help is needed
please follow the steps below.
o
Connecting Devices:
o
Do you need help selecting the best connection?
ƒ To get the best digital audio and picture, use an HDMI connection.
ƒ Component is the 2 nd best followed by S-Video and A/V cables (RCA Cables,
Composite Cables).
o
What type of cable are you using?
ƒ HDMI Cable
– Connect an HDMI cable to the HDMI jack on the back of your TV and to the
HDMI Out jack on the HDMI device.
ƒ Component Video Cables are red, green and blue. The audio cables are red and
white.
–
Connect a component video cable to the COMPONENT IN jacks on the back of
your TV and to the COMPONENT Out jacks on the component device.
ƒ S-Video Cables are round with 4 pins in the middle. The audio cables are red and
white.
–
Connect an S-Video cable to the S-VIDEO jack on the back of your TV and to
the S-Video Out jack on the S-Video device.
– Connect an audio cable to the L AUDIO and R AUDIO jacks on the back of
your TV and to the Audio Out jacks on the S-Video Device.
ƒ A/V Cables (RCA Cables, Composite Cables) have a yellow video cable, and red and
white audio cables.
– Connect A/V cables to the AV IN jacks on the back of your TV and to the AV
Out jacks on the A/V device.
• Setting Up Channels:
o Are you using a cable/satellite box, cable connected directly to the TV, or an antenna?
ƒ If you are using a cable or satellite box you must use the remote that came with that
box to change channels.
–
Make sure you have the correct input selected to view channels via the cable
or satellite box. For example, if the cable or satellite box is connected via
component cables please press the COMP button on your remote to select
Component to view your channels.
ƒ If you are using cable connected directly to the TV:
1. Press MENU. The on-screen menu opens.
2. Press ◄ or ► to highlight Channel, then press v to access the Channel menu.
3. Press ◄ or ► to select Cable.
4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan and your TV memorizes all cable channels
you receive.
ƒ If you are using an antenna:
1. Press MENU. The on-screen menu opens.
2. Press ◄ or ► to highlight Channel, then press ▼ to access the Channel
menu.
3. Press ◄ or ► to select Air.
4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan and your TV memorizes all over-the-air
channels you receive.