Dixon 13631-0702 - Manual (Page 39)

39
CARE AND MAINTENANCE
ELECTRICAL SYSTEMS:
Keep all connections clean and tight.
CLEANING THE MOWER:
Wash mower periodically. Clean above and below deck.
High pressure washing and alkaline based soaps can cause damage
to bearings and other parts of the mower. After washing your
mower, start the engine and engage the mower deck for a few
minutes to disperse any water that may have accumulated in bear-
ings, pulleys or fans.
Note: Allow mower to cool before washing. If bearings are hot,
they will draw moisture inside as they dry and cause corrosion.
MOWER DECK PLATES:
Check periodically. Replace
bolted-on wear plates
before shaft wears into
mower deck plates. See
illustration.
SERIAL NUMBERS:
The serial number is located on frame at rear of engine.
WARRANTY:
Refer to Warranty Registration Form (sample on page 12).
PARTS/SERVICE:
See your Dixon dealer for replacement parts, warranty or
service.
PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL