Nortec SAM-e - Manual (Page 51)

SAM-e Installation | 48
Header Installation
1 Install header insulation for SAM-e; expand header insulation to fit over header and slide on.
Ensure that edges tuck underneath synthetic grommets on top of header. Secure insulation in
place using metal straps. See Step 2.
2 Install header insulation for SAM-e Dual Inlet; expand insulation to fit over header and slide on.
Additionally, expand smaller metal cover for inlet leg and slide on. If inlet leg insulation conflicts
with inlet adapter, trim insulation to fit. Secure both covers in place with metal strapping. See
Step 3.
3 Install header insulation for Mini SAM-e; expand header insulation to fit over header and slide on.
Take care when installing to avoid permanently bending insulation. Inspect for a tight fit after
installation. See Step 4.