Norsat 25W ATOM - Manual (Page 15)

ATOM 25W/40W/50W Revision 1.1
908239
15 908239_r1.1 - Operator Manual ATOM KU
25-40-50W.doc
M
ESSAGE
D
EFINITIONS
getident
This command returns the part number, software revision and serial number of the unit.
Figure 2-3: Command getident
getstatus
This command instructs the unit to respond with fault flag, forward power and temperature. Note: reverse
power, “revpwr”, in the response is a future enhancement and is not currently supported.
 A “0” after “fault” indicates no faults. A “1” indicates a fault. Use command “getfaults” to
determine what fault exists.
 Power is in dBm.
 Temperature is in degrees C. The temperature scale is from –55 to 150 C, with approximately
+/- 2 degrees C accuracy.
Figure 2-4: Command getstatus