NewHank BDP-432 - Manual (Page 24)

22
Setup – customizing setting in the main menu
Specific setting method and description
Menu Submenu Item Setting and description
Information
Connection test
IP setting
Network
(Based
on the
actual
model
function
shall
prevail.)
I
Display the network information, such as interface,
P address, etc.
Test whether the network is connected
successfully. If the network setting is changed,
please check whether the network setting is
proper in this option.
Network OK (connected successfully)
Network error (connection failed; please reset)
Network OK, proxy error (network is connected
successfully, but the proxy setting has error;
please reset the proxy)
!
Set the IP address accordingly in either modes
below
Auto (obtain IP address automatically)
Manual (set IP address manually, and open the
dialog box below)
Press [ ]/[ ] to select the setting item, press
[ ] to clear original settings, and then press
number keys to input the network information;
after that, press [OK] to save the settings, which
will take effect immediately; while setting, press
[Return] to exit the dialog box.
Network information
Interface Ethernet
Address type Manual
IP address
Subnet mask
Default gateway
DNS1
DNS2
If wireless network access is selected, it requires
configuration.
Search
Search available wireless network around, and
the results are shown on the screen as below;
Wireless setting
you can select accordingly
General
Setting