5 connection details, 1 power supply pinout – Nevion VikinX Sublime series Rev.W User Manual
Page 9
VikinX Sublime Digital Audio Routers
Rev. W
nevion.com | 9
2.5 Connection details
The Sublime routers have the following service connections on the rear of each product:
Figure 1: Sublime service connectors.
SYNC
2
:
Synchronization signal (in). Black burst/composite/tri-level sync
reference input with passive loop-through for vertical interval
switching.
LOOP:
Synchronization signal (out). Loop-through of SYNC input.
NCB IN:
Network Control Bus Input. The protocol of this bus is described in a
separate manual.
NCB OUT:
Network Control Bus Output.
ETHERNET:
10/100Base-T Ethernet bus for external router control.
RS 232:
RS-232 for external control protocols.
POWER A:
±15VDC power connector.
POWER B:
±15VDC power connector, redundant supply.
CONFIGURATION:
Configurations switch. See Chapter 3 for further descriptions.
2.5.1 Power Supply pinout
The DE9 male sockets for the power connection on Sublime routers and Control Panels
have the following pin-out;
Pin #
Description
1
GND
2
Not connected
3
Not connected
4
+15VDC
5
Not connected
6
Not connected
7
Not connected
8
-15VDC
9
Not connected
2
Synchronization of an audio router is not necessary, but an available feature for users who intend to switch this router
synchronized to video, using video synchronization signals.