Nevion AV-3G-XMUX - Manual (Page 23)

Configuration 23
AV-3G-XMUX User Manual Rev. B
Figure 6.3 : Example 2
The module above is set to embed all 4 audio groups. Each embedder group takes signals from
the different AES pairs.
The front panel LEDs will show the presence of audio on the AES inputs.
It becomes more complicated if complex routing is required because the embedding of each group
can only be done in one place.
e.g. embed group1 can only be controlled with SW1.1-4. Route these first then use the unused
switches to set up the de-embedding.
Figure 6.4 : Example 3
The module above is set to:-
• Embed group 1 from AES 1 & 2.
• Embed group 2 with de-embedded group 1. ie move group 1 to 2.
• De-embed groups 1 to AES 5 & 6 and group 2 to AES 7 & 8.