Nevion AV-3G-XMUX - Manual (Page 11)

Specifications 11
AV-3G-XMUX User Manual Rev. B
5 Specifications
5.1 SD HD and 3G SDI
One electrical input and one electrical output. One optical input and one optical output available
as options. Optical range depends on the output power of the transmitter and the sensitivity of
the receiver of the next module.
Table 5.1 Video Standards
Video standards ITU-R BT.665 SMPTE S292 and S425 level A and B
Embedded audio SMPTE S272, S299(1+2:2010)
Standards not supported 1250 line SMPTE 295M
5.1.1 Error detection
• Input video lock (Active overrides all other error flags)
• Incorrect format framing (TRS)
• EDH according to SMPTE RP165
• Line CRC and TRS errors
• Ancillary packet checksum errors
• Number of audio samples per line and frame
All SDI parameters conform to the relevant standard, ITU-R BT.656, SMPTE S292, S425.
5.1.2 Optical input-PIN
Optical wavelength 1200-1620nm ±40 nm
Maximum Optical power SD/HD: -3 dBm, 3G: -5 dBm
Sensitivity SD/ HD /3G -25/ -20/ -17 dBm
Return loss Better than 27 dB.
Maximum reflected power 4%
Transmission circuit fiber Single mode
Connector SC/UPC