Communication port connectivity, Figure 12: radio port configuration, starutil – NavCom RT-3020 Rev.F User Manual
Page 48

RT-3020 User Guide – Rev. F
3-46
Figure 12: Radio Port Configuration, StarUtil
Communication Port Connectivity
Connect the supplied LEMO 7-Pin connector of the
serial cable (P/N 94-310059-3006) to COM 2 (factory
default Control Port) of the RT-3020. Connect the
DB9 end to the control device.
Some devices may require an additional
adapter. The receiver is configured as a DCE
device.
COM 2 is the RT-3020 logical control port by
default. COM 1 can be configured as the
control port by using the appropriate NavCom
proprietary commands or StarUtil. However,
there are caveats to Logical / Physical port
assignments.
The Control Port is a logical input/output port
and can not share the physical port with any
other logical port. The Control Port typically
handles the most data and requires baud
rates in excess of 19.2K baud, particularly in
multi-hertz measurement and navigation
applications. Though Com 1 is physically
- SF-3050 Logging Data to Internal Memory SurvCE (4 pages)
- SF-3040 Logging Data to Internal Memory or SD Card (6 pages)
- SF-3050 Logging Data to USB Using SurvCE (4 pages)
- StarFire over IP (5 pages)
- SF-3050 Quick Start (4 pages)
- SF-3050 A Computationally Efficient Ambiguity Resolution (7 pages)
- StarFire (5 pages)
- StarFire to SW v3.0.12.0 (3 pages)
- SF-3050 Rev.I (196 pages)
- StarUtil-3000 Rev.G (177 pages)
- Sapphire Rev.L (450 pages)
- StarUtil-3000 Rev.A (119 pages)
- SF-3050 Rev.A (169 pages)
- SF-3050 Rev.B (201 pages)
- SF-3050 Rev.D (235 pages)
- Rinex Utility Rev.D (17 pages)
- SF-3040 Quick Start (4 pages)
- SF-3040 Rev.F (217 pages)
- SurveCE Integration Rev.A (150 pages)
- Install Utility Rev.C (26 pages)
- LAND-PAK Quick Start Rev.B (7 pages)
- LAND-PAK Rev.E (156 pages)
- StarUtil Rev.C (58 pages)
- LAND-PAK Rev.N (194 pages)
- StarUtil Rev.B (8 pages)
- StarUtil Rev.F (134 pages)
- SF-2040 Rev.E (63 pages)
- RT-3010 Rev.E (61 pages)
- StarFire Satellite Change Rev.G (24 pages)
- StarFire Satellite Change Rev.I (23 pages)
- TS Collecting Receiver (2 pages)
- TS Factory Default (2 pages)
- SF-2040 Rev.C (178 pages)
- LAND-PAK Rev.F (159 pages)
- SF-2040 Rev.F (93 pages)
- SF-2110 Quick Start Rev.A (2 pages)
- StarPac Rev.A (15 pages)
- StarControl Rev.C (56 pages)
- SF-2050 Rev.F (99 pages)
- TruBlu Rev.A (2 pages)
- VueStar Rev.B (13 pages)
- SF-2110 Rev.B (99 pages)
- StarUtil-2110 Rev.A (85 pages)
- RT-3010 Rev.F (89 pages)