MicroLinks UM12 - user manual - Manual (Page 61)

Microscope Software manual http://www.ViTiny.com
61
Copyright © 2008-2014 MicroLinks Technology Corp.
Fig.5-61.
Fig. 5-61 Draw a line in actual length
5.4.6 Scale information setting “ ”
This setup screen indicates to set whether to show the unit value or not, see Fig.
5-60. Choose “length” means to display the length of the line, by capital letter “L”
expression, if length is 2.33mm, it will show L=2.33mm besides the line. If choose “none”, no
value will show on the dialogue. If show “P” means “perimeter”, “A” means “Area”, “C”
means “Circumference, and “R” means ”radius”
Fig.5-62 Scale information setting dialog