MicroLinks UM12 - user manual - Manual (Page 59)

Microscope Software manual http://www.ViTiny.com
59
Copyright © 2008-2014 MicroLinks Technology Corp.
16.2 times the actual size.
Fig 5-55 The magnification ratio on the
upper right corner
Fig 5-56 measure ratio by ruler
 Ratio displayed on the picture
Fig. 5-57 shows the options for ratio display. Choose the display way first, then
click 「 」in measurement mode to save the picture, the ratio will be saved
and shown on the upper right corner; or click 「 」to copy the previewed
image to previewed picture. If “monitor” is selected, the ratio displayed on the
picture is calculated by current image size and Filed of View. If “print” is selected,
the ratio is calculated by current image size, Field of View and printing
resolution (the default setting is 960dpi). If “both” is selected, both of the ratio
will be displayed as Fig. 5-58. The “S” represents screen ratio while “P”
represents printing ratio.
Fig 5-57 Setting of picture magnification Fig 5-58 Saved ratio