MicroLinks UM12 - user manual - Manual (Page 43)

Microscope Software manual http://www.ViTiny.com
43
Copyright © 2008-2014 MicroLinks Technology Corp.
5.1.9 Transparent adjustment
Image can be adjusted from the scrollbar to change the pictures transparency. See
Fig 5-14.
Fig.5-14 Transparency adjust by scrollbar
5.1.10 Knockout color “ ”
Choose to knockout background color and some color on image can be cut out.
5.1.11 Combined image “ ”
Before capture image click the button, which will combine video image and loaded
image to combine. If not, the capture images will only video image.
5.2 Aiming mode
The aiming mode may draw different type like the cross, circular, rectangle, and area. It
helps the user observation. It can draw the different aiming mode in the video image. Fig.5-15
is the selection to aiming mode, aiming toolbar shown in Fig.5-16. This mode may overlap the
different aiming functions.
Fig.5-15 Aiming mode
Fig.5-16 Aiming mode toolbar
5.2.1 Draws cross “ ”
Click this button to draw the cross which may adjust the size by scrollbar. Show in
Fig.5-17.