MicroLinks UM12 - user manual - Manual (Page 57)

Microscope Software manual http://www.ViTiny.com
57
Copyright © 2008-2014 MicroLinks Technology Corp.
Fig.5-49 Create new scale file
After creating new file, input vertical and horizontal’s scale value shown in
Fig.5-50 and if want to change scale color, select on “choose color” button to
change color.
Fig.5-50 Input vertical and horizontal scale value
 Scale ratio
The machine’s Sensor of image ratio is 4:3, if checked fixed ratio, then the
horizontal and vertical scale will make the adjustment by 4:3 ratio, shown in Fig.
5-51. For example, input in the horizontal scale value to 400, the vertical scale
value will automatically adjust to 300.
On the other hand, due to the software will automatically calculate the
scale range for horizontal or vertical scale, thus, the user just need to measure
and enter one of the horizontal or vertical scale. i.e., while only measure and
enter the horizontal scale range, it can calculate the vertical scale range
automatically.
Fig.5-51 Fixed ratio adjustment