MicroE MTE Series - Manual (Page 10)

Page 10
MTE
Sensor Alignment Tolerances
Axis Alignment Tolerance
X Direction of Motion
Y ± 0.15mm
Z ± 0.15mm
θ
X
± 1.0°
θ
Y
± 2.0°
θ
Z
± 2.0°
Z
Y
X
θ
z
Sensor Head Installation
(Side Mount Configuration)
MTE ™ Series Encoders
Sensor Mounting Orientation and
Tolerances
Axis diagram (Side mount bracket not shown.)
1.
Install the Sensor
Use a wrench and M2, M3 screws to install the sensor and Side Mount Bracket Kit. Refer to the interface
drawing to make sure sensor is oriented properly with reference to the scale.
1.2 Install the sensor into the
Side Mount Bracket Kit.
Customer mounting
fixture
1.1 Install the Side Mount
Bracket Kit on to the customer
mounting fixture.
Customer mounting
fixture
Side Mount Bracket Kit,
Model Number: BK-SM-MTE
Side Mount Bracket Kit