Microcom 326M User Guide - Manual (Page 25)

Chapter 3 Getting Started
326M User’s Guide
13
3.4 Loading Media
The open frame printers have been designed to make loading media a simple process. No
adjustments are required when installing media once the media guides are set, thus
reducing down time. Contact your Microcom Corporation Representative about the
availability of custom size media guides. Follow the instructions below to properly load the
media.
1. Tear off a clean edge on the media before loading into the printer.
2. Insert the media into the media path (see Figure 6), located on the back of the
printer, until you feel resistance.
3. Push and hold the FEED button to feed the media through the printer.
4. Once the media exits the front of the printer, release the button.
Figure 8 Loading Media (426M)
Media Path FEED button