Microcom 326M User Guide - Manual (Page 15)

326M User’s Guide
3
Chapter 1: Printer Specifications
1.1 General Specifications
Width * 9.25 ” (235mm)
Height * 4.25
” (108mm)
Depth * 4” (102mm)
Weight * 4.18 lbs. (1.9 kg)
Electrical Auto-sensing 90-264 VAC ; 50-60 Hz
Minimum Current 4.2 Amps
Temperature 40° F
– 104° F (5° C – 40° C) Operating
Humidity 10% – 85%, non-condensing
SRAM Memory 32MB
Flash Memory 8MB
Agency Approvals
Designed to meet CUL, CE, and to comply with
FCC Class A.
Interface Communications:
RS-232 Serial Network Connectivity
RS-232, 9 pin D-Sub connector (DCE) 10BASE-T
Flow Control: XON, XOFF, and CTS Hosts: Windows® NT, 95, 98, and 2000
Parity: Odd, Even, and None Protocols: TCP/IP
Data Bits: 7 or 8
USB (Universal Serial Bus)
Version 1.1 supported
Table 1 General Specifications
1.2 Printing Specifications
Print Type Direct Thermal
Print Resolution
203 DPI (8 dots/mm)
300 DPI (11.808 dots/mm) - optional
Maximum Print Speed
6”/sec. (152mm/sec.)
4”/sec. (102mm/sec.) with 300 DPI option
Maximum Print Width
326M = 3.15 inches (80mm)
326M = 3.189 inches (81mm) with 300 DPI
426M = 4.094 inches (104mm)
426M = 4.252 inches (108mm) with 300 DPI
Print Length
50” (1270mm) using standard memory
25” (635mm) with 300 DPI option
Table 2 Printing Specifications
* NOTE: Listed specifications are based on a standard print mechanism and may vary
based on final configuration.