Metz MECABLITZ 36 C-2 - Manual (Page 102)

102
Manual flash mode
Modo flash manuale
Funcionamiento manual del flash
ture increment. They may also have different effective
aperture values for the different focal length settings.
This will then have to be compensated by manual cor-
rection of the aperture setting on the flash unit!
7.2 Manual flash mode
The mecablitz always fires uncontrolled flashes at full
light output when in manual mode. Adaptation to the
given photographic situation is achieved by selecting a
corresponding aperture on the camera.
• Set the main switch of the mecablitz 36 C-2 at the “M”
position.
• Set the upper “ISO” slide switch at the ISO speed of the
film loaded in the camera.
• Set the lower slide switch at the selected zoom position of
the reflector (28 mm, 35 mm, 50 mm or 85 mm).
☞