Metz MECABLITZ 26 AF-1 digital User Manual

Page 94

5.4 Remote slave flash mode
5.4.1 26AF-1 Canon

The flash unit supports Canon`s wireless E TTL Remote
System in slave flash mode (set on the camera if
possible).

Wireless remote control of one or more slave flash units
by one master or controller flash unit on the camera
(for example, mecablitz 64 AF-1 digital Canon) or by the
camera master (depending on the camera type) is thus
possible

For slave flash unit 26AF-1, slave group A as well as all
remote channels 1, 2, 3 and 4 are always set.

5.4.2 26AF-1 Nikon

The flash unit supports the wireless Nikon remote
system in slave flash mode (set on the camera if
possible) and is compatible with the Nikon “Advanced
Wireless Lighting” system.

Here wireless remote control of one or more slave flash
units by a master flash unit (depending on the camera
type) on the camera (e.g. mecablitz 64AF-1 digital
Nikon) or by the camera’s master is possible.

For slave flash unit 26AF-1, slave group A as well as all
remote channels 1, 2, 3 and 4 are always set.

5.4.3 26AF-1 Olympus

As a slave flash unit (set on the camera if possible), the
flash unit is compatible with the wireless Olympus RC
flash system (RC = remote control).

Here wireless remote control of one or more slave flash
units by a master flash unit (depending on the camera
type) on the camera (e.g. mecablitz 64AF-1 digital
Olympus) or by the camera’s master is possible.

For slave flash unit 26AF-1, slave group A as well as all
remote channels 1, 2, 3 and 4 are always set.

5.4.4 26AF-1 Pentax

The flash unit supports the wireless Pentax PTTL remote
system in slave flash mode (set on the camera if
possible).

Here wireless remote control of one or more slave flash
units by a master or controller flash unit on the camera
(for example, 64 AF-1 digital Pentax) or by the camera’s
master is possible.

For slave flash unit 26AF-1, all remote channels 1, 2, 3
and 4 are always set.