Metz MECABLITZ 26 AF-1 digital - Manual (Page 103)

103
k
12 Technical data
Max. guide numbers at ISO 100:
14 with 24mm wide-angle lens
20 with 35 mm standard reflector
26 with 85 mm telephoto diffuser
Illumination of the reflector
(small picture format 24 x 36): 35mm
24 mm with integrated wide-angle diffuser
85 mm with telephoto diffuser
Flash modes:
Canon: . . . .E-TTL, E-TTL II, Remote-Slave mode
Nikon: . . . . .i-TTL, i-TTL-BL, Remote-Slave mode
Olympus: . .TTL, Remote-Slave mode
Pentax: . . . .P-TTL, Remote-Slave mode
Samsung: . .A-TTL, Remote-Slave mode
Sony: . . . . .Pre-flash TTL, ADI measurement, Remote-
Slave mode
Video light: High-power LED
(also used for AF auxiliary light), typically
30 lux at 1 m distance, 2 brightness levels
Operating time: 2-5h
Power supply:
Two micro AAAs (alkaline-manganese batteries, NiMH
rechargeable batteries, lithium batteries)
Colour temperature: Ca. 5600 K
Synchronisation:
low-voltage ignition
Number of flashes:
approx. 100 with high-capacity alkaline-manganese
batteries
approx. 110 with NiMH rechargeable batteries
approx. 160 with lithium batteries.
Recycling time: approx. 0,3 s - 8 s.
Vertical swivel ranges and lock-in positions of the
reflector head (see fold-out page):
0° First close-up range position / “lying” on the
camera for transport
20° 2nd close-up range position
40° Normal position (unit flashes in the direction of
the optical axis)
90° Indirect flashing (unit flashes diagonally
upwards)
Dimensions in mm (W x H x D) in the normal position:
approx. 63 mm x 85 mm x 85 mm
Weight: approx. 115g (without power supplies)