Metric Halo Production Bundle - Manual (Page 63)

Processing
63
Figure 12.3: Predelay of 0 ms
Figure 12.4: Predelay of 45 ms
RT60
The RT60 control sets the overall reverb time in seconds; RT60 is a standard measurement of how long it takes
the acoustic energy in a room to fall below 60 dB. When looking at the Reverb impulse, changes in the RT60
will be seen as a “thickening” of the reverb tail:
Figure 12.5: RT60 of .1 Seconds
Figure 12.6: RT60 of 7 Seconds
Damping
The Damping control sets how much of the reverb signal is removed before being fed back into itself as a
percentage. Low damping settings can lead to a ringing, metallic sound.