Meinberg PZF600 - Manual (Page 14)

14
Menu PAR.COMx
The four menus PAR.COM0 to PAR.COM3 allow the configuration of the serial
RS232 ports COM0 to COM3.
The following settings are possible:
Baudrate: 600, 1200, 2400, 4800, 9600 and 19200 Baud
Framing: 7N2, 7E1, 7E2, 8N1, 8N2, 8E1, 7O1, 7O2 and 8O1
Menu SER.MODE
The four serial ports COM0 to COM3 are able to send out time strings in three different
output modes. After the Set button is pressed the following content is displayed:
The four letters on the right side represent the output mode of the serial ports COM0,
COM1, COM2 and COM3 (from the left to the right). With another brief push of the Set
button the first letter starts to blink and can be set to one of the following options now:
'S' timestring starts with a new second
'M' timestring starts with a new minute
'R' timestring starts just after sending an ASCII '?' (3F hex) to the clock
Menu STR.COMx
The four menus STR.COM0 to STR.COM3 allow the selection of the serial time string
formats for COM0, COM1, COM2 and COM3.
The following time strings can be selected:
- MBG - Meinberg Standard String
- Uni Erlangen String
- ATIS String
- Sysplex String
- SAT String
- SPA String
- CompuTime String