Meinberg SyncBox PTPv2 - Manual (Page 19)

Configuration: PTP
In the PTP configuration all parameters related to the PTP protocol can be
monitored and changed.
With the “Profile” parameter you can switch between the “Default” multicast
profile and the “Unicast” PTP profile. Depending on the selected profile the
corresponding TSU configuration file below will be used.
The delay mechanism is used to measure the propagation time between two nodes.
You can choose the end-to-end or the peer-to-peer mechanism. When using peer-to-
peer delay mechanism, every network node has to support peer-delay measurements.
19