Measurement Computing Daq PC-Cards User Manual

Page 24

B-2

978697

Appendix B – Card Removal

(g) After deleting the file, check the remaining Oem files to ensure there are no additional occurrences of that

particular IOtech configuration.

(h) Delete additional Oem files, as applicable. Be sure you do not delete Oem files that you want to maintain,

such as files for modems and network cards.

This completes the procedure for removing the .inf files.

(2) Remove the IOtech device from the Device Manager

(a) Ensure the card (or adapter) is installed for the IOtech device to be removed.

(b) Access Windows’ Device Manager. You can access the Device Manager by using Windows Start Menu

and navigating as follows:

Start

⇒ Settings ⇒ Control Panel ⇒ System ⇒ Device Manager

Data Acquisition and locate the device to be removed. In the example (below, left) an IOtech 16-bit
Analog Input device will be removed.

For WBK20, EPPCard/1, DBK35, and LPTCard/1: In the Device Manager listing, double-click on
Ports (COM & LPT) and locate the device to be removed. In the example (below, right) an IOtech
WBK20 card will be removed.