Measurement Computing PostView - Manual (Page 8)

8 908893 PostView User’s Guide
Edit Menu
Display
Clicking “Display” brings up an Options dialog box for viewing or changing the display preferences.
This is discussed in the following section.
The Display Scroll Bar
A slide-type scroll bar resides just below the display. Use the slide to move through the data.
Understanding the Status Bar
A status bar at the bottom of the display page shows numerical data for any one selected channel of a
single display. Data such as Time and amplitude Value are in reference to cursor position on the display. If
two cursors are employed, data is in reference to the last cursor moved.
Note: Certain labels applicable to a display’s status bar will not be visible until after the first calculation is
made.
Status Bar – Example Analog Scope
Time: The time value (from the x-axis) for the position of the cursor last moved.
Value: The amplitude (from the y-axis) of the selected channel at the cursor position.
Avg.: The average value for all data points of the selected channel.
Min: The largest negative value reached by the selected channel.
Max: The highest value reached by the selected channel.
Select the desired
channel from this
region.
Channel 4 is
currently selected.
The cursor last-moved indicates a
value of -0.1738 V at 0.110168
seconds for Channel 4.
Time and Value for the second cursor
Time and Value for the
cursor last moved. Delta Value (difference between the 2 cursor
)