Measurement Computing Extender488 - Manual (Page 6)

Section 1 Introduction
1-2
1.2 AVAILABLE ACCESSORIES
The following accessories are available from Measurement Computing for use with the Extender488s.
CA-7-1 1.5 foot IEEE 488 cable
CA-7-2 6 foot IEEE 488 cable
CA-7-3 6 foot IEEE 488 cable; shielded
CA-7-2 6 foot IEEE 488 cable; reverse entry
CA-18-X Shielded serial cable with mating
connectors for the Extender488;
specify X in feet from 100 to 4000
CA-24-X 100µm/140µm duplex fiber optic cable
with mating connectors for the
Extender488/F;
specify X in feet from 100 to 4000
CN-20 Right angle IEEE 488 adapter
CN-21 IEEE 488 connector extender
CN-22 IEEE 488 multi-tap bus strip;
4 connectors in parallel
CN-23 IEEE 488 panel mount feed-thru connector
114-0920 Additional Manual
Rack488-1 Rack mount kit; one Extender488 package
Rack488-2 Rack mount kit; two Extender488 packages
TR-2 External power supply for Extender488
105-125v; 50/60 Hz
TR-2E External power supply for Extender488
210-250v; 50 Hz
Refer to the Measurement Computing catalog for those accessories not listed here.