Measurement Computing Extender488 - Manual (Page 11)

Section 2 Getting Started
2. 1
GETTING STARTED
2.1 INSPECTION
The Extender488s are carefully inspected, both mechanically and electrically, prior to shipment.
When you receive the inter face, carefully unpack all items from the s hipping carton and check for any
obvious signs of physical damage w hich may have occurred during shipment. Immediately report any
damage found to the shipping agent. Remember to retain all shipping materials in the event that shipment
back to the factory becomes necessary.
Every Extender488 is shipped with the following....
Extender488 IEEE bus extender interface
TR-2 or TR-2E Power Supply; TR-4 115V
TR-4E 220V
114-0920 Instruction Manual
Note: accessories ordered may be packaged and shipped separately
WARNING
The Extender488 requires a regulated external power s upply with a maximum
output of 5.25 volts! Using voltages above this level will result in damage to the
interface. Use only power supplies provided by Measurement Computing.