Pod-1 dimensions – Measurement Computing DBK81 User Manual
Page 5
To connect the POD-1 to the DBK83:
1. Connect the male end of the CA-239 cable to the female 44-pin connector on the DBK83.
2. Connect the female end of the CA-239 cable to the male 44-pin connector on the POD-1.
The system design of the DBK83 allows for the quick connection/disconnection of up to 14
thermocouples at one time. You may find it advantageous to have several POD-1 modules
permanently wired to different sets of thermocouples and to simply swap the CA-239 cable
between them and one DBK83 card, as desired.
Because of the opposing gender on the CA-239 cable ends, it is possible to mate multiple
CA-239 cables together to increase the distance from the POD-1 to the DBK83. Because of
characteristics of the cable design and the signals on it, measurement integrity is not
affected by doing so, and there are no practical limits on how many cables can be used.
POD-1 Dimensions
POD-1 Dimensions. POD-1 is for use with DBK43.
DBK Option Cards and Modules
989494
DBK81, DBK82, and DBK83 pg. 5