Measurement Computing WLS-TC - Manual (Page 8)

8
Chapter 2
Installing the WLS-TC
What comes with your WLS-TC shipment?
The following items are shipped with the WLS-TC.
Hardware
 WLS-TC
 USB cable
 USB power adapter (2.5 watt AC-to-USB power adapter for remote wireless operation)
Software
 MCC DAQ Software CD
Documentation
 MCC DAQ Software Quick Start Guide
This booklet provides an overview of the MCC DAQ software you received with the device, and includes
information about installing the software. Please read this booklet completely before installing any software
or hardware.
 Setup Options
An overview of installation options is provided in the Wireless Setup document that ships with the device.
Unpacking
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the device from its packaging, ground yourself using a wrist strap or by simply
touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, contact us immediately using one of the following methods:
 Knowledgebase:
kb.mccdaq.com
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support
 Fax: 508-946-9500 to the attention of Tech Support
 Email:
[email protected]
For international customers, contact your local distributor. Refer to the International Distributors section on our
website at
www.mccdaq.com/International .
Installing the software
Refer to the Quick Start Guide for instructions on installing the software on the MCC DAQ CD. This booklet is
available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf .
Installing the hardware
Before you operate the WLS-TC as a local or remote device, first install it onto your system and configure it
with InstaCal.
Install the MCC DAQ software before you install the WLS-TC
The driver needed to run your board is installed with the MCC DAQ software. Therefore, you need to install the
MCC DAQ software before you install your board. Refer to the Quick Start Guide for instructions on installing
the software.