Measurement Computing USB-1608GX-2AO - Manual (Page 18)

USB-1608GX-2AO User's Guide Specifications
18
Analog output
Table 5. Analog output specifications
Parameter Condition Specification
Number of channels 2
Resolution 16 bits
Output ranges Calibrated ±10 V
Output transient Host computer is reset, powered on, suspended,
or a reset command is issued to the device Duration: 500 µs
Amplitude: 2 V p-p
Powered off Duration: 10 ms
Amplitude: 7 V peak
Differential
non-linearity ±0.25 LSB typ
±1 LSB max
Output current AOUTx pins ±3.5 mA max
Output short-circuit
protection AOUTx connected to AGND Unlimited duration
Output coupling DC
Power on and
reset state DACs cleared to zero-scale: 0 V, ±50 mV
Output noise 30 µVrms
Trigger source TRIG (see External trigger on page 19)
Sample clock source Internal D/A clock or external D/A clock
(AOCKI pin)
Output update rate 500 kHz / (number of channels in scan)
Settling time To rated accuracy, 10 V step 40 µs
Slew rate 9 V/µs
Throughput Software paced 33 to 4000 S/s typ, system-dependent
Hardware paced 500 kS/s max, system-dependent
Note 1: Leave unused AOUTx output channels disconnected.
Note 2: AOUTx defaults to 0 V whenever the host computer is reset, powered on, suspended, or a reset
command is issued to the device.
Table 6. Calibrated absolute accuracy specifications
Range Absolute accuracy (±LSB)
±10 V 16.0
Table 7. Calibrated absolute accuracy components specifications
Range % of reading Offset
(±mV) Offset tempco
(µV/°C) Gain tempco
(ppm of range/°C)
±10 V ±0.0183 1.831 12.7 13
Table 8. Relative accuracy specifications (±LSB)
Range Relative accuracy (INL)
±10 V 4.0 typ