Functional details, External components, Usb connector – Measurement Computing USB-1024HLS User Manual
Page 11: Functional details -1, External components -1, Usb connector -1, Led -1
Chapter 3
Functional Details
External components
The USB-1024HLS has the following external components, as shown in Figure 3-1.
!
USB connector
!
LED
!
Screw terminal banks (2)
USB
connector / cable
Screw terminal
Pins 21 to 40
Screw terminal
Pins 1 to 20
LED
Figure 3-1. USB-1024HLS external components
USB connector
The USB connector is on the right side of the USB-1024HLS housing. This connector provides +5 V power and
communication. The voltage output is system-dependent, and may be less than +5 V. No external power supply
is required.
LED
The LED on the front of the housing indicates the communication status of the USB-1024HLS. It uses up to 5
mA of current and cannot be disabled.
explains the function of the USB-1024HLS LED.
Table 3-1 LED illumination
LED Illumination
Indication
Steady green
The USB-1024HLS is connected to a computer or external USB hub.
Blinks continuously
Data is being transferred.
Blinks three times
Initial communication is established between the USB-1024HLS and the computer.
3-1