Measurement Computing USB-1024LS - Manual (Page 9)

Chapter 2
Installing the USB-1024LS
What comes with your USB-1024LS shipment?
The following items are shipped with the USB-1024LS:
Hardware
! USB-1024LS
! USB cable (2 meter length)
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf ). This booklet supplies a brief description of
the software you received with your USB-1024LS and information regarding installation of that software.
Please read this booklet completely before installing any software or hardware.
Unpacking the USB-1024LS
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the USB-1024LS from its packaging, ground yourself using a wrist strap or by
simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If your USB-1024LS is damaged, notify Measurement Computing Corporation immediately by phone, fax, or e-
mail. For international customers, contact your local distributor where you purchased the USB-1024LS.
! Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
! Fax: 508-946-9500 to the attention of Tech Support
! Email: [email protected]
2-1