Measurement Computing PCIe-DIO96H - Manual (Page 12)

PCIe-DIO96H User's Guide Installing the PCIe-DIO96H
12
Field wiring and signal termination
You can use the following screw terminal boards to terminate field signals and route them into the
PCIe-DIO96H using the C100FF-x cable.
 CIO-MINI50 – 50-pin screw terminal board.
 CIO-TERM100 – 100-pin screw terminal board (two 50-pin IDC connectors).
 CIO-SPADE50 — 16" × 4" termination panel which mates with both 37-pin and 50-pin connectors.
 SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections.
 CIO-ERB24 – 24 Form C relays, 6 A relay accessory board for digital signal conditioning.
 CIO-SERB24/FD – 24 Form C relays, 10 A, fault detecting relay accessory board with socketed and field-
replaceable relays.
 CIO-ERB48 – 48 Form C relays, 6 A, relay, 50-pin accessory board for digital signal conditioning.
 CIO-SERB48 – 48 Form C relays, 10 A relay accessory board with socketed and field-replaceable relays.
 SSR-RACK24 – 24-channel, solid-state relay mounting rack for digital signal conditioning.
 SSR-RACK48 – 48-channel, solid-state relay mounting rack with quad-format modules.
Details on these products are available on our website.
For additional information about digital interfacing
Detailed information regarding digital interfacing is contained in MCC's Guide to DAQ Signal Connections.
This document is available on our website at
www.measurementcomputing.com/signals/signals.pdf .