Measurement Computing CIO-DO48H - Manual (Page 10)

4.4 CONNECTOR DIAGRAM AND REGISTER
ASSIGNMENTS
The CIO-DOxxH user connector is one to four 50-pin header-type connectors
accessible from the rear of the PC through the expansion backplate. The signals
available are direct connections to a digital buffer chip.
The connector accepts female 50-pin header type connectors, such as those on the
C50FF-2, a 2-foot cable with female connectors.
Figure 4-1. User Connector Pinout and Register Assignments
Figure 4-1 shows the register assignments for the outputs of all three board versions.
If frequent changes to signal connections or signal conditioning is required, please
refer to the information on the CIO-TERM100, CIO-SPADE50 and CIO-MINI50
screw terminal boards.
6