Measurement Computing AI-EXP32 - Manual (Page 6)

6
Chapter 2
Installing the AI-EXP32
What comes with your AI-EXP32 shipment?
The following items are shipped with the AI-EXP32.
Hardware
 AI-EXP32
 Expansion connector plate with four screws
Software
 MCC DAQ CD
Documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide. This booklet provides
an overview of the MCC DAQ software you received with the device, and includes information about installing
the software. Please read this booklet completely before installing any software or hardware.
Optional components
ACC-202 Din-rail kit
Accessory for mounting a AI-EXP32 to a standard DIN rail. Use the thread-forming screws to attach the DIN
rail clip to your device.
Unpacking the AI-EXP32
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the AI-EXP32 from its packaging, ground yourself using a wrist strap or by simply
touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail:
 Knowledgebase: kb. mccdaq.com
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support
 Fax: 508-946-9500 to the attention of Tech Support

[email protected] Email:
Thread-forming
screws